TRAINING BASIC GAS COMPRESSOR: OPERATION & MAINTENANCE

PELATIHAN BASIC GAS COMPRESSOR: OPERATION & MAINTENANCE

PELATIHAN DASAR KOMPRESOR GAS : PENGOPERASIAN & PERAWATAN

TRAINING BASIC GAS COMPRESSOR: OPERATION & MAINTENANCE OBJECTIVE

Upon the completion of the course, the participants are expected to gain a basic understanding regarding the operation and the maintenance of compressor system and to have an ability to analyze and to solve problems encountered in the operation and in the maintenance of those compressors.

TRAINING BASIC GAS COMPRESSOR: OPERATION & MAINTENANCE OUTLINE

  1. Compressor Fundamental
  2. Compressor System
  3. Compressor Units
  4. Compressor Installation
  5. Air Compressor Instrumentation
  6. Introduction to Thermodynamics principles on the compressor operation.
  7. Free Body Diagram Analysis to solve problems regarding the load at any compressor components, and as the basic for vibration and stress analysis.
  8. Main components of compressor and their individual functions.
  9. Load analysis and force balancing devices.
  10. Sealing systems, kind of and the work of each sealing system.
  11. Performance characteristics of gas compressor.
  12. Operation parameters.
  13. Vibration and methods to overcome excessive vibrations.
  14. Balancing basics and stress relieve device.

WHO SHOULD ATTEND THIS TRAINING BASIC GAS COMPRESSOR: OPERATION & MAINTENANCE

Technicians, mechanics, maintenance supervisors of various industrious companies using gas compressors for production and all staff employees who involved in gas compressor operations.

INSTRUKTUR TRAINING BASIC GAS COMPRESSOR: OPERATION & MAINTENANCE

Ir. Y. Agus Jayatun, MT.,IPP.

Ir. Y. Agus Jayatun, MT.,IPP. Adalah lulusan dari teknik mesin UGM, dan sekarang Beliau menjadi dosen di Teknik Mesin Sekolah Tinggi Teknologi Nasional Yogyakarta. Pak Agus Jayatun sudah sering menjadi instruktur untuk training-training di bidang kompetensi Beliau, seperti: Centrifugal Pump; Operation and Maintenance, Compressor; Operation and Maintenance, Boiler; Operator Sertification, Maintenance Management, Total Alignment and Balancing, Mechanical Power Transmision, Pipeline design, construction and maintenance, Control Valve, design, operation and maintenance, Rotating Equipment; Operation and Maintenance, Bearing; Design and Maintenance, Lubrication, Vibration analysis and diagnostic, Above Ground Storage Tank, Corrosion Control : Sacrifice Anode, Impressed Current, Galvanizing, Metallurgy for non metallurgic engineers, Metallurgy in Welding, Health, Safety and Environment (HSE). Pak Agus Jayatun juga sudah berpengalaman bekerja di beberapa perusahaan dengan berbagai posisi seperti dari

sales engineer, Mechanical and Electrical Site Engineer, M/E. Site Engineer pada Process of Clean Water Instalation, M/E. Site Engineer pada Office Building of PLN, Supervisor M/E Engineer, Mechanical Engineer pada Detail Engineering Design of Non Liquid Waste of Komplek Industri Kulit dan masih banyak yang lainnya. Beliau memiliki beberapa sertifikasi profesional dari PII dalam bidang Plumbing/Piping, Air Conditioning, Indoor Building Transportation, Mechanical, dan electrical.

Jadwal Pelatihan Bali Training 2022 :

batch 1 : 18 – 20 Januari 2022 | 25 – 27 Januari 2022

batch 2 : 8 – 10 Februari 2022 | 15 – 17 Februari 2022 | 22 – 24 Februari 2022

batch 3 : 2 – 4 Maret 2022 | 8 – 10 Maret 2022 | 15 – 17 Maret 2022 | 22 – 24 Maret 2022 | 29 – 31 Maret 2022

batch 4 : 5 – 7 April 2022 | 19 – 21 April 2022

batch 5 : 10 -12 Mei 2022 | 17 – 19 Mei 2022 | 24 – 26 Mei 2022

batch 6 : 7 – 9 Juni 2022 | 14 – 16 Juni 2022 | 21 – 23 Juni 2022 | 28 – 30 Juni 2022

batch 7 : 5 – 7 Juli 2022 | 12 – 14 Juli 2022 | 26 – 28 Juli 2022

batch 8 : 2 – 4 Agustus 2022 | 9 – 11 Agustus 2022 | 23 – 25 Agustus 2022

batch 9 : 6 – 8 September 2022 | 13 – 15 September 2022 | 20 – 22 September 2022 | 27 – 29 September 2022

batch 10 : 4 – 6 Oktober 2022 | 11 – 13 Oktober 2022 | 18 – 20 Oktober 2022 | 25 – 27 Oktober 2022

batch 11 : 1 – 3 November 2022 | 8 – 10 November 2022 | 15 – 17 November 2022 | 22 – 24 November 2022

batch 12 : 6 – 8 Desember 2022 | 13 – 15 Desember 2022 | 20 – 22 Desember 2022 | 27 – 29 Desember 2022

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan di Bali Training :

  • Yogyakarta, Hotel Dafam Malioboro
  • Jakarta, Hotel Amaris Tendean
  • Bandung, Hotel Golden Flower
  • Bali, Hotel Ibis Kuta
  • Surabaya, Hotel Amaris(6.00.000 IDR / participant)
  • Lombok, Hotel Jayakarta

Investasi Pelatihan tahun 2019 ini :

  • Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  • Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Bali Training :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  2. FREE Akomodasi Peserta ke tempat pelatihan .
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia