PELATIHAN BASIC PROGRAMMABLE LOGIC CONTROLLER
PELATIHAN DASAR PEMROGRAMAN LOGIKA KONTROL
Deskripsi TRAINING BASIC PROGRAMMABLE LOGIC CONTROLLER
A Programmable Logic Controller (PLC) or programmable controller is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or lighting fixtures. PLCs are used in many industries and machines, such as packaging and semiconductor machines. Unlike general-purpose computers, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed or non-volatile memory. A PLC is an example of a real time system since output results must be produced in response to input conditions within a bounded time, otherwise unintended operation will result.
OBJECTIVES TRAINING BASIC PROGRAMMABLE LOGIC CONTROLLER
This course is designed to improve participant’s knowledge and skill about the use of PLC for automation system in Industry. This training will be emphasized to the technique of program design, debug, simulation and wiring system with PLC based. Participants will also learn about I/O equipment’s election and also the utilization of several particular functions such as timer, counter, arithmetic operations and control. Participants could also discuss with Instructor about several application programs and tools I/O wiring.
What will you learn in this course?
COURSE MATERIAL TRAINING BASIC PROGRAMMABLE LOGIC CONTROLLER
- Introduction to Programmable Logic Controller
- P L C Hardware (Types of PLC, CPU, Digital I/O, Analog I/O, I/O Devices)
- PLC Software (Ladder Diagram, Function Block Diagram, STL, Addressing, Program Simulation)
- Sequential and Interlock Control
- Timer and Counter Programming
- Arithmetic/Logic Programming
- Application Programming (Level Controller, Batch Process Control, Temperatur Controller)
- Wiring and Trouble Shooting
- Development System
Who should attend this TRAINING BASIC PROGRAMMABLE LOGIC CONTROLLER
This course is dedicated to:
- Personnel who want to broaden his knowledge about basic concept, programming, the use of PLC, and also its maintenance and repair.
Instructors TRAINING BASIC PROGRAMMABLE LOGIC CONTROLLER
Apip Badaruddin, ST, MT.
He held his master degree in Bandung Institute of Technology (ITB) and has developed his skill and knowledge by following course inside and outside Indonesia, such as Hydrocarbon Refrigeration, Ecozone BV in The Netherlands. His core of competency is in refrigeration and has been practicing it as a lecturer in State Polytechnic of Bandung for more than 14 years. For the last two years, he has been lecturing 1 & 2 Applied Refrigeration. From 1996 until 2006, he also actively participated in a professional activity: Training, Installation, and refinement of Refrigerator machine.
Ir. Muhammad Arman, S.Psi.
In 1994, he graduated from Physics Engineering Department of ITB majoring in Instrument. To expert his study, he followed International Course on Hydrocarbon Refrigeration in Harlem, The Netherlands. Besides, he also broadened his knowledge of psychology in Padjadjaran University and graduated in 1997.
He started his carrier at PT. Alam Risindo Agung, Environmental Engineering Consultant, Jakarta, as a Junior Field Engineer. Thereupon, he entered State Polytechnic of Bandung, Refrigeration and Air Conditioning Department as a Lecturer until now on. He is a PLC specialist, design, implementation and evaluation several PLC project for industry. He also conduct many short term and mid term training in instrument, control, PLC, computer communication, microprocessor for company such as PT. Pertamina, PT. Suzuki Indomobil, PT. Frisian Flag Indonesia, PDAM Banjarmasin, Thames PAM Jaya, etc.
Jadwal Pelatihan Bali Training 2021 :
5-7 Januari 2021 | 19-21 Januari 2021 | 26-28 Januari 2021
9-10 Februari 2021 | 23-25 Februari 2021
9-11 Maret 2021 | 23-25 Maret 2021
6-8 April 2021 | 20-22 April 2021 | 27-29 April 2021
4-6 Mei 2021 | 11-13 Mei 2021 | 18-20 Mei 2021 | 25-27 Mei 2021
8-10 Juni 2021 | 22-24 Juni 2021
13-15 Juli 2021 | 20-22 Juli 2021
3-5 Agustus 2021 | 24-26 Agustus 2021
7-9 September 2021 | 21-23 September 2021
5-7 Oktober 2021 | 19-21 Oktober 2021
9-11 November 2021 | 23-25 November 2021
7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021
Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta
Lokasi Pelatihan di Bali Training :
- Yogyakarta, Hotel Dafam Malioboro
- Jakarta, Hotel Amaris Tendean
- Bandung, Hotel Golden Flower
- Bali, Hotel Ibis Kuta
- Surabaya, Hotel Amaris(6.00.000 IDR / participant)
- Lombok, Hotel Jayakarta
Investasi Pelatihan tahun 2019 ini :
- Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
- Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas Pelatihan di Bali Training :
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
- FREE Akomodasi Peserta ke tempat pelatihan .
- Module / Handout
- FREE Flashdisk
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia