Training Grounding in Electrical Power Distribution Systems

Pelatihan Grounding in Electrical Power Distribution Systems

Pelatihan Landasan dalam Kekuatan Elektrik

DESCRIPTION Training Grounding in Electrical Power Distribution Systems

This seminar is designed for engineers and technologists who are engaged in the design of power distribution system installations. The seminar is based on ANSI/IEEE Standard #80 “IEEE Guide for Safety in AC Substations Grounding”. It builds on the theoretical fundamentals of grounding and provides the participant with the practical knowledge and application to design and test the grounding system to ensure safety for those who work on the system as well as the public. In particular, the tolerable current for the human body and the maximum allowable step, touch and ground potential rise will be explained. Analysis of ground fault currents and how to effectively ground the system components will be discussed

WHO SHOULD ATTEND Training Grounding in Electrical Power Distribution Systems

Electrical Engineers, Project Engineers, Design Engineers, Plant Engineers or those who have a considerable understanding of electrical grounding and are responsible for the engineering, design, construction, installation, inspection, operation, or maintenance of electrical grounding systems in an industrial, commercial or institutional or utility setting.

SUMMARY OUTLINE Training Grounding in Electrical Power Distribution Systems

  1. Introduction and Purpose of Grounding
  • System Grounding
  • Equipment Grounding
  1. Sources of Voltage Rise on System Components
  2. Tolerable Limits for Body Current
  3. Analysis of Grounding Systems
  • Grounding Standards and References
  • Calculation of Step and Touch Voltages
  • Analysis of Ground Grid Fault Current
  • Grounding Electrodes and Mats
  1. Soil Considerations
  • Characteristics (Moisture and Temperature)
  • Chemical Content
  • Crushed Stone
  • Measurement of Soil Resistivity
  • Methods to Lower Soil Resistivity
  • Methods to Improve Ground Resistance
  1. Selection of Conductors and Connectors
  • Thermal Capacity
  • Mechanical Strength
  • Connector Types
  1. Grounding of System Components
  • Distribution Substations
  1. Soil Resistivity
  2. Ground Grid Resistance
  3. Ground Potential Rise
  4. Touch Voltage
  5. Step Voltage
  • Overhead Distribution System
  • Underground Distribution System
  • Service Entrance Equipment
  1. Special Considerations & Hazards
  • Switch Handles
  • Switch Handles
  • Distribution Poles (Wood, Concrete, & Steel)
  • Fences
  • Cable Shields & Concentric Neutral Grounding
  • Surge Arresters
  • Grounding Transformers
  • Portable Protective Grounds
  1. Ground Grid Maintenance
  • Visual and Manual Inspection of Grounding Systems
  • Testing Methods and Equipment
  1. Ground Fault Protection
  • Ground Fault Sensing
  • Requirements for GFP
  1. Study Cases
  • Case Study #1
  1. Exploring alternatives for reducing the high grounding resistance at SS site.
  2. Interconnecting with the system neutral as a solution.
  3. Calculation of induced voltage on joint use communication cable.
  • Case Study #2
  1. Ground grid calculations using IEEE #80 Equations for a large interconnecting substation

METHODE Training Grounding in Electrical Power Distribution Systems

  • Discuss
  • Case Study
  • Evaluation
  • Simulation

INSTRUKTUR Training Grounding in Electrical Power Distribution Systems

Teguh Santoso, Ir

Teguh Santoso experienced more than 26 years in Electrical.

Jadwal Pelatihan Bali Training 2021 :

5-7 Januari 2021 | 19-21 Januari 2021 | 26-28 Januari 2021

9-10 Februari 2021 | 23-25 Februari 2021

9-11 Maret 2021 | 23-25 Maret 2021

6-8 April 2021 | 20-22 April 2021 | 27-29 April 2021

4-6 Mei 2021 | 11-13 Mei 2021 | 18-20 Mei 2021 | 25-27 Mei 2021

8-10 Juni 2021 | 22-24 Juni 2021

13-15 Juli 2021 | 20-22 Juli 2021

3-5 Agustus 2021 | 24-26 Agustus 2021

7-9 September 2021 | 21-23 September 2021

5-7 Oktober 2021 | 19-21 Oktober 2021

9-11 November 2021 | 23-25 November 2021

7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan di Bali Training :

  • Yogyakarta, Hotel Dafam Malioboro
  • Jakarta, Hotel Amaris Tendean
  • Bandung, Hotel Golden Flower
  • Bali, Hotel Ibis Kuta
  • Surabaya, Hotel Amaris(6.00.000 IDR / participant)
  • Lombok, Hotel Jayakarta

Investasi Pelatihan tahun 2019 ini :

  • Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  • Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Bali Training :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  2. FREE Akomodasi Peserta ke tempat pelatihan .
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia