Training Inventory Maintenance, Repair, and operations

Pelatihan Inventory Maintenance, Repair, and operations

Pelatihan Inventori Perawatan, Peerbaikan, dan Operasi

GENERAL Training Inventory Maintenance, Repair, and operations

Keeping the right equipment and parts on-site to repair and maintain production equipment is a balancing act. You need to keep manufacturing running while minimizing unnecessary overhead. It’s about more than just having the right part at the right time. It’s about planning, managing inventory, coordinating deliveries from a wide variety of suppliers, having real-time visibility of every part in the pipeline, and making sure the whole complex, resource-intensive process is cost effective.

This complexity is what makes maintenance, repair, and operations supplies (MRO) so challenging for so many businesses. Identifying and eliminating indirect supply chain inefficiencies requires a close look at the processes, people, and technologies involved in the entire MRO supply chain. This initial evaluation helps to identify each component of the total cost of ownership. Our goal is to look beyond just price, and analyze less-obvious expenses, eliminate waste, and ultimately streamline the supply chain

OUTLINE Training Inventory Maintenance, Repair, and operations

* Maintenance types

+ Preventive maintenance

+ Corrective maintenance

+ Predictive maintenance

+ Reliability centered maintenance

* Maintenance Management System

* Maintenance Planning and Scheduling

* Supply chain management

* Intelligent Inventory System

* Demo Version)

WHO SHOULD ATTEND Training Inventory Maintenance, Repair, and operations

Inventory staff, maintenance staff, engineer, etc.

INSTRUCTOR Training Inventory Maintenance, Repair, and operations

Dr. ir. Paryana Puspaputra

Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012

He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Federal Motor, Murni Gold, Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, Autodesk, ZWCAD, Delcam, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM

Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, etc.

Jadwal Pelatihan Bali Training 2021 :

5-7 Januari 2021 | 19-21 Januari 2021 | 26-28 Januari 2021

9-10 Februari 2021 | 23-25 Februari 2021

9-11 Maret 2021 | 23-25 Maret 2021

6-8 April 2021 | 20-22 April 2021 | 27-29 April 2021

4-6 Mei 2021 | 11-13 Mei 2021 | 18-20 Mei 2021 | 25-27 Mei 2021

8-10 Juni 2021 | 22-24 Juni 2021

13-15 Juli 2021 | 20-22 Juli 2021

3-5 Agustus 2021 | 24-26 Agustus 2021

7-9 September 2021 | 21-23 September 2021

5-7 Oktober 2021 | 19-21 Oktober 2021

9-11 November 2021 | 23-25 November 2021

7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan di Bali Training :

  • Yogyakarta, Hotel Dafam Malioboro
  • Jakarta, Hotel Amaris Tendean
  • Bandung, Hotel Golden Flower
  • Bali, Hotel Ibis Kuta
  • Surabaya, Hotel Amaris(6.00.000 IDR / participant)
  • Lombok, Hotel Jayakarta

Investasi Pelatihan tahun 2019 ini :

  • Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  • Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Bali Training :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  2. FREE Akomodasi Peserta ke tempat pelatihan .
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia