Training Pumps And Compressors Program

Training Troubleshooting And Diagnostic Methods


Pumps and compressors are generally critical machines in any production process, and hence it is vital that maintenance is most effective for these units. This course aims to provide delegates with a comprehensive understanding of how to use a combined predictive and preventive maintenance approach to achieve maximum reliability and greatest understanding of any deterioration that may occur.


  1. The program assumes familiarity with the design and construction of pumps and compressors. From this starting point it adopts an analytical approach to understanding the failure of all types of pumps and compressors.
  2. From a component-by-component perspective, the program investigates the root causes of failure, and relates these to operating conditions and process parameters. Design, installation, lubrication and wear related failure mechanisms are identified and a detailed understanding of the troubleshooting and diagnostic methods needed to detect and identify these is developed.
  3. The program provides participants with the knowledge needed to be effective in the inspection, monitoring and diagnostics of pumps and compressors, with emphasis placed upon the importance of a combined condition monitoring and strip-down inspection approach to maintenance.


Engineers, supervisory and technical staff involved in the monitoring, predictive maintenance and diagnostics of pumps and compressors.


  1. Pre Test
  2. Friction, lubrication and wear mechanisms
  3. Adhesive wear, abrasive wear, fatigue and fretting
  4. Machinery life cycles
  5. Mechanical issues, balancing and alignment
  6. Statistical reliability analysis
  7. Reliability models
  8. Root cause of, symptoms and detection mechanisms for imbalance
  9. Root cause of, symptoms and detection mechanisms for looseness
  10. Root cause of, symptoms and detection mechanisms for misalignment
  11. Root cause of, symptoms and detection mechanisms for gear problems
  12. Root cause of, symptoms and detection mechanisms for bearing problems
  13. Cavitation, causes and prevention
  14. Anti-friction bearings: types, lifetime, mounting, applications, related problems
  15. Plain and pad bearings, thrust bearings: operation, maintenance, incidents
  16. Mechanical seals, types, operation, related problems
  17. Other seals for positive displacement pumps and reciprocating compressors
  18. Performing a balance
  19. Vibration monitoring
  20. Overall and spectral measurements
  21. Vibration limits
  22. Introduction to spectrum analysis
  23. Lubricant monitoring
  24. Shape, size, amount, chemical composition of debris
  25. Analytical techniques
  26. The role of condition monitoring in pumps and compressor maintenance Diagnostic methods
  27. Capabilities and limitations of condition monitoring, and the need for a combined approach
  28. The importance of plant inspection
  29. Measurement devices, and what to monitor
  30. Post Test


YOGYAKARTA – Hotel Dafam Malioboro
JAKARTA – Hotel Amaris Tendean
BANDUNG – Hotel Verona Palace Bandung
BALI – Hotel Eden Kuta
LOMBOK NTB – Lombok Plaza Hotel

*untuk waktu dan tempat pelaksanaan training bisa kami sesuaikan dengan kebutuhan peserta.

Jadwal Pelatihan Bali Training 2021 :

5-7 Januari 2021 | 19-21 Januari 2021 | 26-28 Januari 2021

9-10 Februari 2021 | 23-25 Februari 2021

9-11 Maret 2021 | 23-25 Maret 2021

6-8 April 2021 | 20-22 April 2021 | 27-29 April 2021

4-6 Mei 2021 | 11-13 Mei 2021 | 18-20 Mei 2021 | 25-27 Mei 2021

8-10 Juni 2021 | 22-24 Juni 2021

13-15 Juli 2021 | 20-22 Juli 2021

3-5 Agustus 2021 | 24-26 Agustus 2021

7-9 September 2021 | 21-23 September 2021

5-7 Oktober 2021 | 19-21 Oktober 2021

9-11 November 2021 | 23-25 November 2021

7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021

CatatanJadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta.jadwal pelatihan pengelolaan proyek terpadu

Investasi Pelatihan Bali Training:jadwal training manajemen proyek terintegrasi

  1. Investasipelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta
  2. Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Bali Training:jadwal training manajemen proyek terpadu berbasis pmbok

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
  2. FREE Akomodasi ke tempat pelatihan bagi peserta
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia Technorati