Training System Safety Engineering And Management

Pelatihan System Safety Engineering And Management

TRAINING PURPOSE:

1. The system safety engineering and management is intended to describe “how” to set up and implement the safety risk management process.
2. The system safety engineering and management establishes a set of consistent and standardized procedures and analytical tools.
3. The system safety engineering and management is intended for use in support of specific system safety program plans.
4. The system safety engineering and management provides guidance on “how” to perform safety risk management, other questions concerning “when, who, and why” should be addressed through the three types of plans discussed in this document: System Safety Management Plan (SSMP), and a System Safety Program Plan (SSPP), and an Integrated System Safety Program Plan (ISSPP).
5. The system safety engineering and management focuses on “how” to perform safety risk management, while these planning documents describe, the organization’s processes and procedures for implementing system safety.

TRAINING MATERIAL OUTLINE:

1. Principles of System Safety
• Planning principles
• Hazard analysis
• Comparative safety
• Risk management decision making
• Safety order of precedence
• Behavioral-based safety
• Models used by system safety for analysis
2. Safety Assessments Before Investment Decision
• Safety assessments before investment decision
• Operational safety
• Comparative safety assessment (CSA)
3. Post-Investment Decision Safety Activities
• Post-investment decision safety activities
• Objectives and requirements
• Preparing a system safety program plan
• System safety program plan contents
• Integrated system safety program plan
• Program balance & interfaces
4. System Safety Guidelines for Contracting
• contracting principles
• contracting
• evaluating bidding contractors (system safety checklist)
• managing contractor system safety (contract oversight)
5. Integrated System Hazard Analysis
• Integrated approach
• Risk control
• Use of historical data
6. Safety Analysis – Hazard Analysis Tasks
• The design process
• Analysis
• Qualitative and quantitative analysis
• Design and pre-design safety
• How to review and/or specify a safety analysis
• Evaluating a preliminary hazard analysis
7. Analysis Techniques
• Analysis techniques
• Introduction
• Fault hazard analysis
• Fault tree analysis
• Common cause failure analysis
8. Test and Evaluation Safety
• Tests conducted specifically for safety
• Tests conducted for purposes other than safety
• Test safety analysis
• Other test and evaluation safety considerations
9. Facilities System Safety
• New facility system safety
• Existing facilities
• Facility system safety program
• Analytical techniques
• Facility risk analysis methodology
10. Operational Risk Management (ORM)
• Defining risk and risk management
• ORM principles
• The ORM process summary
• Implementing the ORM process
11. Human Factors Engineering and Safety Principles & Practice
• Human factors process overview
• Managing the human factors program
• Establish human factors requirements
• Conduct human factors integration
• Human factors in system-to-system interfaces
• Human factors engineering and safety guidelines
12. Successful health and safety Management
13. Managing health and safety
14. Safety guidance -Notification and marking of sites

TRAINING INSTRUCTOR

Caecilia Sri Wahyuning S.

Jadwal Pelatihan Bali Training 2021 :

5-7 Januari 2021 | 19-21 Januari 2021 | 26-28 Januari 2021

9-10 Februari 2021 | 23-25 Februari 2021

9-11 Maret 2021 | 23-25 Maret 2021

6-8 April 2021 | 20-22 April 2021 | 27-29 April 2021

4-6 Mei 2021 | 11-13 Mei 2021 | 18-20 Mei 2021 | 25-27 Mei 2021

8-10 Juni 2021 | 22-24 Juni 2021

13-15 Juli 2021 | 20-22 Juli 2021

3-5 Agustus 2021 | 24-26 Agustus 2021

7-9 September 2021 | 21-23 September 2021

5-7 Oktober 2021 | 19-21 Oktober 2021

9-11 November 2021 | 23-25 November 2021

7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan di Bali Training :

  • Yogyakarta, Hotel Dafam Malioboro
  • Jakarta, Hotel Amaris Tendean
  • Bandung, Hotel Golden Flower
  • Bali, Hotel Ibis Kuta
  • Surabaya, Hotel Amaris(6.00.000 IDR / participant)
  • Lombok, Hotel Jayakarta

Investasi Pelatihan tahun 2019 ini :

  • Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  • Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Bali Training :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  2. FREE Akomodasi Peserta ke tempat pelatihan .
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia