Pelatihan Grounding in Electrical Power Distribution Systems
Pelatihan Landasan dalam Kekuatan Elektrik
DESCRIPTION Training Grounding in Electrical Power Distribution Systems
This seminar is designed for engineers and technologists who are engaged in the design of power distribution system installations. The seminar is based on ANSI/IEEE Standard #80 “IEEE Guide for Safety in AC Substations Grounding”. It builds on the theoretical fundamentals of grounding and provides the participant with the practical knowledge and application to design and test the grounding system to ensure safety for those who work on the system as well as the public. In particular, the tolerable current for the human body and the maximum allowable step, touch and ground potential rise will be explained. Analysis of ground fault currents and how to effectively ground the system components will be discussed
WHO SHOULD ATTEND Training Grounding in Electrical Power Distribution Systems
Electrical Engineers, Project Engineers, Design Engineers, Plant Engineers or those who have a considerable understanding of electrical grounding and are responsible for the engineering, design, construction, installation, inspection, operation, or maintenance of electrical grounding systems in an industrial, commercial or institutional or utility setting.
SUMMARY OUTLINE Training Grounding in Electrical Power Distribution Systems
- Introduction and Purpose of Grounding
- System Grounding
- Equipment Grounding
- Sources of Voltage Rise on System Components
- Tolerable Limits for Body Current
- Analysis of Grounding Systems
- Grounding Standards and References
- Calculation of Step and Touch Voltages
- Analysis of Ground Grid Fault Current
- Grounding Electrodes and Mats
- Soil Considerations
- Characteristics (Moisture and Temperature)
- Chemical Content
- Crushed Stone
- Measurement of Soil Resistivity
- Methods to Lower Soil Resistivity
- Methods to Improve Ground Resistance
- Selection of Conductors and Connectors
- Thermal Capacity
- Mechanical Strength
- Connector Types
- Grounding of System Components
- Distribution Substations
- Soil Resistivity
- Ground Grid Resistance
- Ground Potential Rise
- Touch Voltage
- Step Voltage
- Overhead Distribution System
- Underground Distribution System
- Service Entrance Equipment
- Special Considerations & Hazards
- Switch Handles
- Switch Handles
- Distribution Poles (Wood, Concrete, & Steel)
- Fences
- Cable Shields & Concentric Neutral Grounding
- Surge Arresters
- Grounding Transformers
- Portable Protective Grounds
- Ground Grid Maintenance
- Visual and Manual Inspection of Grounding Systems
- Testing Methods and Equipment
- Ground Fault Protection
- Ground Fault Sensing
- Requirements for GFP
- Study Cases
- Case Study #1
- Exploring alternatives for reducing the high grounding resistance at SS site.
- Interconnecting with the system neutral as a solution.
- Calculation of induced voltage on joint use communication cable.
- Case Study #2
- Ground grid calculations using IEEE #80 Equations for a large interconnecting substation
METHODE Training Grounding in Electrical Power Distribution Systems
- Discuss
- Case Study
- Evaluation
- Simulation
INSTRUKTUR Training Grounding in Electrical Power Distribution Systems
Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.
Jadwal Pelatihan Bali Training 2023 :
Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024 || Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024
batch 2 : 4 – 6 April 2023
batch 3 : 26 – 28 Juni 2023
Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024 || Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024
Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024 || Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024
Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024 || Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024
Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta
Lokasi Pelatihan di Bali Training :
- Yogyakarta, Hotel Dafam Malioboro
- Jakarta, Hotel Amaris Tendean
- Bandung, Hotel Golden Flower
- Bali, Hotel Ibis Kuta
- Surabaya, Hotel Amaris(6.00.000 IDR / participant)
- Lombok, Hotel Jayakarta
Investasi Pelatihan tahun 2019 ini :
- Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
- Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas Pelatihan di Bali Training :
- Hotel
- Tempat Pelatihan .
- Module / Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia