Training CONTROL VALVES AND ACTUATORS

Desember 10, 2017
 |  Tidak ada Komentar

Pelatihan CONTROL VALVES AND ACTUATORS

Pelatihan Kontrol Lapangan dan Aktuator

Deskripsi Training CONTROL VALVES AND ACTUATORS

Extensive course materials provided contained useful information about valves/sizing and selection both theoretical and practical. You will gain a practical understanding of control valves, actuators, and positioner designs and their applications. The course also provides methods that can be used to identify specific valve problems and arrive at acceptable solutions within engineering tolerance

Tujuan Training CONTROL VALVES AND ACTUATORS

  1. Compare various types of final control elements
  2. Understand a typical valve operation in a control loop
  3. Differentiate between various types of valves and the benefits of each
  4. Compare rising stem to rotary style valves
  5. Analyze a control system to determine control valve needs
  6. Use ISA standards for control valve specification and selection
  7. Size valves for any flow condition likely to be found in a process plant
  8. Evaluate and select actuators for specific applications
  9. Specify appropriate auxiliaries including positioners and I/P transducers
  10. Design control valve installations that are safe and trouble-free

Materi Training CONTROL VALVES AND ACTUATORS

  1. Introduction:
  • Valve in Loop,
  • Actuator,
  • Positioner
  1. Basic Valve Types:
  • Globe Valves,
  • Ball Valves,
  • Plug Valves,
  • Butterfly Valves
  1. Actuators:
  • Spring/Diaphragm,
  • Piston,
  • Vane,
  • Scotch-Yoke,
  • R & P
  1. Comparison:
  • Rising Stem,
  • Rotary Stem,
  • Accessories,
  • Positioner,
  • I/P Converters
  1. Valve Performance:
  • Gain,
  • Time,
  • Trim,
  • Special Needs
  1. Flashing/Cavitation & Noise:

Cause/Effect,

Prevention,

OSHA,

Source and Abatement

  1. Installation:
  • Performance, Safety and Others
  1. Valve Sizing:
  • Valve sizing calculation Manual,
  • Valve Sizing calculation Computer
  1. Specification and Selection:
  • Process Requirements,
  • Other Considerations
  1. Maintenance and Troubleshooting Considerations:
  • Special Requirements,
  • Diagnostic Tools
  1. Smart Valves:
  • Available Designs,
  • Applications in Industry
  1. Test valves to evaluate performance factors
  1. Size valves manually and with software
  1. Specify valves, actuators, and auxiliaries for specific applications
  1. Evaluate operation of valves with pneumatic actuators and positioners
  1. Smart valve/positioner operation demonstration

Peserta Training CONTROL VALVES AND ACTUATORS

This Intensive program covering the educational needs of Instrumentation and Control Engineers & Technicians, Mechanical Engineers & Technicians, Projects Engineers, Operation Engineers, Process and Utility Supervisors, and Technical Supervisory personnel involved in Sizing, Selecting, and Applying Process Control Valves. No specific prerequisite training or experience required for registration.

Koordinator Training CONTROL VALVES AND ACTUATORS

Dr. Eng. Deendarlianto, & Team

Jadwal Pelatihan Bali Training 2021 :

5-7 Januari 2021 | 19-21 Januari 2021 | 26-28 Januari 2021

9-10 Februari 2021 | 23-25 Februari 2021

9-11 Maret 2021 | 23-25 Maret 2021

6-8 April 2021 | 20-22 April 2021 | 27-29 April 2021

4-6 Mei 2021 | 11-13 Mei 2021 | 18-20 Mei 2021 | 25-27 Mei 2021

8-10 Juni 2021 | 22-24 Juni 2021

13-15 Juli 2021 | 20-22 Juli 2021

3-5 Agustus 2021 | 24-26 Agustus 2021

7-9 September 2021 | 21-23 September 2021

5-7 Oktober 2021 | 19-21 Oktober 2021

9-11 November 2021 | 23-25 November 2021

7-9 Desember 2021 | 14-16 Desember 2021 | 21-23 Desember 2021

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan di Bali Training :

  • Yogyakarta, Hotel Dafam Malioboro
  • Jakarta, Hotel Amaris Tendean
  • Bandung, Hotel Golden Flower
  • Bali, Hotel Ibis Kuta
  • Surabaya, Hotel Amaris(6.00.000 IDR / participant)
  • Lombok, Hotel Jayakarta

Investasi Pelatihan tahun 2019 ini :

  • Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  • Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Bali Training :

  1. FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  2. FREE Akomodasi Peserta ke tempat pelatihan .
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia
Pengelolaan Lingkungan
 |  Tags: , , , , ,