Pelatihan Flow Assurance In Pipeline System
Pelatihan Aliran Asuransi
Deskripsi Training Flow Assurance In Pipeline System
Flow assurance is a relatively new term in oil and gas industry. It refers to ensuring successful and economical flow of hydrocarbon stream from reservoir to the point of sale. Flow assurance is most critical task during deep water energy production because of the high pressures and low temperature involved. The financial loss from production interruption or asset damage due to flow assurance mishap can be astronomical. What compounds the flow assurance task even further is that these solid deposits can interact with each other and can cause catastrophic blockage formation in pipelines and result in flow assurance failure.
Training Flow Assurance In Pipeline System Course Outlines
- Introduction to Onshore and Offshore Pipeline Flow Assurance
- Economical Flow from Reservoir to the point of sale
- Identification of Critical problems and Blockage in pipelines
- Handling of Solid deposits
- Application of Fluid Mechanics in Pipeline Operations Integrity
- Avoiding Surging problem and High Viscosity liquid flow Failure
- Evaluation of Chemical Injection and Pigging
- Potential challenges in pipeline operations
- Introduction to oil and gas fluid transportation – platforms, risers, floating production units, pipeline • •
to shore and to storage or refineries
- Reservoir fluid properties – oil, gas, condensate and water
- Fluid data and phase determination
- The causes and operational responses to pipeline flow failures
- Emulsion and multiphase fluid flow phenomena
- Fluid flow analysis – single and multiphase
- Surging and slugging
- Slug formation and prediction
- Riser slugging and surge analysis
- Slug catcher types and operations
- Deposition of paraffin, wax, asphaltene and naphtenates
- The chemistry of hydrocarbon deposits
- Prevention and remediation of wax formation and deposition
- Scaling – prediction of scale precipitation
- Sand production – deposition and pipeline erosion
- Hydrate formation – blockage and corrosion
- Hydrate prevention and control
- SRB attack – internal pipeline corrosion control
- Chemical injection – emulsion breaker, corrosion inhibitor, scale inhibitor, biocides, paraffin inhibitor, flow
improver
- Pigging – pig types and operations
- The prediction of flows in production risers
- Fluid mechanics of multiphase flow in pipeline
- Transient multiphase simulation tools
- Start-up and shutdown issues
Instructor Training Flow Assurance In Pipeline System
Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia. He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneiderâ€OMRON PLC Training Center, Maranatha Christian University, Bandung. He is the chairman of National Student Competition on PLC
Programming held regularly since 2007 in ITB. He serves as instructor either for public or for inâ€house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPIâ€Bandung, LAPIâ€ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources
Indonesia.
Jadwal Pelatihan Bali Training 2023 :
Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024 || Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024
batch 2 : 4 – 6 April 2023
batch 3 : 26 – 28 Juni 2023
Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024 || Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024
Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024 || Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024
Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024 || Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024
Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta
Lokasi Pelatihan di Bali Training :
- Yogyakarta, Hotel Dafam Malioboro
- Jakarta, Hotel Amaris Tendean
- Bandung, Hotel Golden Flower
- Bali, Hotel Ibis Kuta
- Surabaya, Hotel Amaris(6.00.000 IDR / participant)
- Lombok, Hotel Jayakarta
Investasi Pelatihan tahun 2019 ini :
- Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
- Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas Pelatihan di Bali Training :
- Hotel
- Tempat Pelatihan .
- Module / Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
- Training room full AC and Multimedia