Pelatihan HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

Pelatihan Desain Permesinan

OBJECTIVES Training HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

  1. Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
  2. Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
  3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

Training HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS OUTLINES

Introduction

  1. The role and responsibility of each member of discipline
  2. The different type of project that proses engineering are involved with
  3. The complexities of a project
  4. A basic understanding of the deliverables each type of project.
  5. A basic understanding of the schedule for the different type of project

Process Simulator

  1. What is process simulator
  2. What are they
  3. How they are used
  4. How to determine the suitable one
  5. Process simulator needs
  6. Component and component behavior
  7. Process flowsheet or description
  8. Operating condition or design specification
  9. Calculate steady state process of heat and mass flow
  10. Model the surface facilities and gas plant
  11. Design or process evaluation
  12. Step to modular simulation(Hysis)
  13. Specify component and thermodynamic model
  14. Define process configuration
  15. Specify stream or unit operation connectivity
  16. Operation parameters are ready
  17. Run simulation
  18. Result Checking
  19. Check the simulation result is in line with the real design practice
  20. Verify the result

Process Simulation Unit Operation

  1. Select Hysis calculation block to represent process equipment
  2. Understanding of unit operation in Hysis
  3. Understanding single stage separation in Hysis

Process Simulation – Set & Adjust

  1. Describe the characteristic of feed forward controller
  2. Describe the characteristic of feedback controller
  3. Understand how to use SET as feed forward controller
  4. Understand how to ADJUST as feedback controller

Process Simulation – Crude Stabilizer

  1. Understand stream mixing and splitting block
  2. Understand pressure change block
  3. Select suitable heat transfer block
  4. Model a simple crude stabilizer

Recycle Stream

  1. Select suitable tear stream
  2. Installing recycle loop stream

INSTRUKTUR Training HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

Sigit Budi, ST., MT and team

PARTICIPANTS Training HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

Senior operators, Junior operators, Junior production engineers and supervisors, Well service engineers and supervisors, Materials, Logistics and warehouse personnel, Work over and Well services engineers and supervisors

METODE Training HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

Lecturing, presentasi, diskusi interaktif, sharing, studi kasus

Jadwal Pelatihan Bali Training 2023 :

Batch 1 : 03 – 04 Januari 2024 | 16 – 17 Januari 2024 || Batch 2 : 06 – 07 Februari 2024 | 20 – 21 Februari 2024

batch 2 : 4 – 6 April 2023

batch 3 : 26 – 28 Juni 2023

Batch 7 : 09 – 10 Juli 2024 | 23 – 24 Juli 2024 || Batch 8 : 06 – 07 Agustus 2024 | 20 – 21 Agustus 2024

Batch 9 : 04 – 05 September 2024 | 18 – 19 September 2024 || Batch 10 : 08 – 09 Oktober 2024 | 22 – 23 Oktober 2024

Batch 11 : 06 – 07 November 2024 | 26 – 27 November 2024 || Batch 12 : 04 – 05 Desember 2024 | 18 – 19 Desember 2024

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta

Lokasi Pelatihan di Bali Training :

  • Yogyakarta, Hotel Dafam Malioboro
  • Jakarta, Hotel Amaris Tendean
  • Bandung, Hotel Golden Flower
  • Bali, Hotel Ibis Kuta
  • Surabaya, Hotel Amaris(6.00.000 IDR / participant)
  • Lombok, Hotel Jayakarta

Investasi Pelatihan tahun 2019 ini :

  • Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
  • Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas Pelatihan di Bali Training :

  1. Hotel
  2. Tempat Pelatihan .
  3. Module / Handout
  4. FREE Flashdisk
  5. Sertifikat
  6. FREE Bag or bagpackers (Tas Training)
  7. Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  8. 2xCoffe Break & 1 Lunch, Dinner
  9. FREE Souvenir Exclusive
  10. Training room full AC and Multimedia